TECMEN

The TM15 ADF710S welding helmet is designed for professional welders, featuring an advanced optical system and an extended shading range. This high-performance helmet enhances safety with its excellent optical clarity and accurate color recognition, while offering easy-to-use settings.

<p>TM15 with ADF710S is a welding helmet of high optical class. Offering advanced visibility and an extended shade range, this helmet is equipped with accurate color recognition and independent arc sensors. Its user-friendly interface, replaceable battery, and compliance with CE standards elevate welding safety and comfort to a higher level.</p>
<ul>
<li>1/1/1/2 optical class certified by CE standard, representing the highest optical class, light diffusion, light homogeneity, and angle dependence.</li>
<li>Comes with 2 built-in arc sensors that can work independently, focusing on the welding arcs without any interference from surroundings, applicable under direct sunlight environment.</li>
<li>User-friendly and intuitive control panel. Mode switch, sensitivity, delay, and shade number are easily adjustable.</li>
<li>Equipped with a solar cell and a replaceable CR2450 lithium battery.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Value</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF710S</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>97*47mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>110<em>90</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>2</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN2.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN8-12</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>By infinitely dial knob</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 1 replaceable CR2450 lithium battery</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/25000s from light to dark</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>N/A</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temp.</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temp.</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM25 with ADF740G Auto Darkening Welding Helmet

TM24 with ADF815S Auto Darkening Welding Helmet

N-SPACE Flip-up Flexible Leather Mask with ADF110P

900 with 950-G Auto Darkening Welding Helmet

Automatic darkening helmets designed for workplace safety are an excellent solution to protect the eyes from glare and harmful rays. In this category, you can find high-quality automatic darkening helmets. These products are used in various fields such as construction, manufacturing, and industrial work, enhancing productivity while safeguarding the eye health of workers.

The TM25 with ADF740G welding helmet, is designed for lightweight and easy operation. Made from new high-impact resistant toughness material, this helmet offers robust protection against high-impact damage.

<p>The TM25 and ADF740G welding helmets are made of high-impact resistant, lightweight, and easy-to-use materials. These helmets enable effective welding in challenging environments with four independent arc sensors and a DARK mode, and allow for quick switching between welding and grinding modes.</p>
<ul>
<li>Made with a new material that has high impact resistance.</li>
<li>Features an externally accessible button for switching to grinding mode.</li>
<li>Can be paired with hard hats for additional head protection.</li>
<li>Shading, sensitivity, and delay settings are adjustable. A 'DARK' mode is also available for tough working environments.</li>
<li>Equipped with four independently functioning arc sensors. These sensors focus on the welding arc regardless of environmental influences and can be applied even under direct sunlight.</li>
</ul>
<table>
<thead>
<tr>
<th>&Ouml;zellik</th>
<th>A&ccedil;ıklama</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF740G</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>96*46.5mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>110<em>90</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.0</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN7-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal (LED and button control)</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>LED and button control</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 1 replaceable CR2450 lithium battery</td>
</tr>
<tr>
<td>Delay (dark to light)</td>
<td>0.05/0.1/0.3/0.6/1.0s, 5 levels</td>
</tr>
<tr>
<td>Low Amperage TIG Rating</td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact-resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li class="flex gap-1" style="text-align: left;">CE</li>
<li class="flex gap-1" style="text-align: left;">ANSI Z87.1</li>
<li class="flex gap-1" style="text-align: left;">AS/NZS</li>
<li class="flex gap-1" style="text-align: left;">EAC</li>
<li class="flex gap-1" style="text-align: left;">COLTS CSA Z94.3</li>
</ul>

Auto Darkening Helmets

The TM24 ADF815S is a welding helmet with a high optical class rating. It features external grinding control and adjustable properties for user adaptability. Compatible with hard hats, it improves visibility of details, thereby enhancing the efficiency of welders.

<p>The TM24 with ADF815S is a high-performance industrial welding helmet. Rated at the highest optical class of 1/1/1/1, it features convenient external grinding control. The helmet's light state is 3.0, and its sensitivity, shade number, and delay can be adjusted for personalized and precise performance.&nbsp;</p>
<ul>
<li>This helmet, with its 1/1/1/1 highest optical class rating, is certified by the CE standard and boasts superior qualities in light diffusion, light homogeneity, and angle dependence.</li>
<li>Equipped with four independently operating sensors, it prevents arc flashes in complex operating environments.</li>
<li>The external grinding control allows for quick switching between welding and grinding modes without the need to remove the welding helmet or gloves.</li>
<li>The adjustable pivot headgear design, featuring a built-in locking mechanism, ensures maximum comfort and balanced weight distribution.</li>
</ul>
<table>
<thead>
<tr>
<th>Specification</th>
<th>Detail</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF815S</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>97*62mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>113*<em>114*</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-8/9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>External</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>By infinitely dial knob</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 2 replaceable CR2450 lithium batteries</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/25000s from light to dark</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable by infinitely dial knob</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temp.</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temp.</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

ADF110P glass lens leather mask is a specialized piece of equipment used in welding and casting processes. This mask is designed to protect the user from high temperatures, sparks, and harmful rays.

<p>The N-SPACE ADF110P welding mask is made of durable leather and features an ADF110P that blocks harmful ultraviolet and infrared rays. It is resistant to high temperatures and mechanical stress, making it ideal for heavy industry workers. It offers comfort and safety with its adjustable headband and hypoallergenic materials.</p>
<div class="flex-1 overflow-hidden">
<div class="react-scroll-to-bottom--css-mloyr-79elbk h-full">
<div class="react-scroll-to-bottom--css-mloyr-1n7m0yu">
<div class="flex flex-col text-sm gizmo:pb-9 dark:bg-gray-800 gizmo:dark:bg-transparent">
<div class="w-full text-token-text-primary border-b border-black/10 gizmo:border-0 dark:border-gray-900/50 gizmo:dark:border-0 bg-gray-50 gizmo:bg-transparent dark:bg-[#444654] gizmo:dark:bg-transparent" data-testid="conversation-turn-37">
<div class="p-4 gizmo:py-2 justify-center text-base md:gap-6 md:py-6 m-auto">
<div class="flex flex-1 gap-4 text-base mx-auto md:gap-6 gizmo:gap-3 gizmo:md:px-5 gizmo:lg:px-1 gizmo:xl:px-5 md:max-w-2xl lg:max-w-[38rem] gizmo:md:max-w-3xl gizmo:lg:max-w-[40rem] gizmo:xl:max-w-[48rem] xl:max-w-3xl } group final-completion">
<div class="relative flex w-[calc(100%-50px)] flex-col gizmo:w-full lg:w-[calc(100%-115px)] agent-turn">
<div class="flex-col gap-1 md:gap-3">
<div class="flex flex-grow flex-col max-w-full gap-3 gizmo:gap-0">
<div class="min-h-[20px] text-message peer flex flex-col items-start gap-3 whitespace-pre-wrap break-words peer-[.text-message]:mt-5 overflow-x-auto" data-message-author-role="assistant" data-message-id="6895dc8d-782c-4f7a-8581-ea1eae846cb5">
<div class="markdown prose w-full break-words dark:prose-invert light">
<ul>
<li>The variable shade auto-darkening filter feature ensures an extremely safe working environment even in unexpected situations.</li>
<li>Made from materials resistant to high temperatures up to 150 &deg;C.</li>
<li>The mask is designed for continuous use and resistance to wear in harsh environments.</li>
<li>Made from non-flammable materials, it provides an extra layer of safety in operations involving fire, such as welding and casting.</li>
<li>The adjustable tightness of the headband makes it suitable for different head sizes.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Information</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF110P</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>92.1 * 35.1 mm</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN8-13</td>
</tr>
<tr>
<td>Switching Time</td>
<td>From light to dark 1/10000s</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10&deg;C to 55&deg;C</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3</td>
</tr>
</tbody>
</table>
<div class="w-full text-token-text-primary border-b border-black/10 gizmo:border-0 dark:border-gray-900/50 gizmo:dark:border-0 bg-gray-50 gizmo:bg-transparent dark:bg-[#444654] gizmo:dark:bg-transparent" data-testid="conversation-turn-27">
<div class="p-4 gizmo:py-2 justify-center text-base md:gap-6 md:py-6 m-auto">
<div class="flex flex-1 gap-4 text-base mx-auto md:gap-6 gizmo:gap-3 gizmo:md:px-5 gizmo:lg:px-1 gizmo:xl:px-5 md:max-w-2xl lg:max-w-[38rem] gizmo:md:max-w-3xl gizmo:lg:max-w-[40rem] gizmo:xl:max-w-[48rem] xl:max-w-3xl } group">
<div class="relative flex w-[calc(100%-50px)] flex-col gizmo:w-full lg:w-[calc(100%-115px)] agent-turn">
<div class="flex-col gap-1 md:gap-3">
<div class="flex flex-grow flex-col max-w-full gap-3 gizmo:gap-0">
<div class="min-h-[20px] text-message peer flex flex-col items-start gap-3 whitespace-pre-wrap break-words peer-[.text-message]:mt-5 overflow-x-auto" data-message-author-role="assistant" data-message-id="00ac3847-2667-4854-adcd-36532000fb2f">
<div class="markdown prose w-full break-words dark:prose-invert light">
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>EAC</li>
</ul>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>

The 950-G welding helmet features side lenses that provide a wide field of view. Its pivot headgear design offers maximum comfort for extended wear.

<p>The 950-G welding helmet is specially designed with side lenses to provide users with a wide field of view and offers maximum comfort through its pivot headgear design. Shade 5 side lenses enhance peripheral vision, increasing safety and providing additional security. Additionally, it features an external button for easy switching to grinding mode and is compatible with hard hats for extra head protection.</p>
<ul>
<li>Offers an expansive and clear perspective of your work environment with a 107x75 mm field of view.</li>
<li>Shade 5 side lenses on both sides maximize the welder's field of view, enhance surrounding vision, and minimize workplace hazards.</li>
<li>The smart digital backlit screen ensures clear and accurate visibility of your welding settings, even in low-light or dark environments.</li>
<li>Allows for quick switching between welding and grinding modes without removing your welding helmet or gloves.</li>
</ul>
<table style="width: 77.7778%;">
<thead>
<tr>
<th style="width: 32.3843%;">Feature</th>
<th style="width: 67.6157%;">Description</th>
</tr>
</thead>
<tbody>
<tr>
<td style="width: 32.3843%;">ADF Model</td>
<td style="width: 67.6157%;">950-G</td>
</tr>
<tr>
<td style="width: 32.3843%;">Optical Class</td>
<td style="width: 67.6157%;">1/1/1/1</td>
</tr>
<tr>
<td style="width: 32.3843%;">Viewing Area</td>
<td style="width: 67.6157%;">107*75mm</td>
</tr>
<tr>
<td style="width: 32.3843%;">Cartridge Size</td>
<td style="width: 67.6157%;">156<em>123</em>33mm</td>
</tr>
<tr>
<td style="width: 32.3843%;">Arc Sensor</td>
<td style="width: 67.6157%;">4</td>
</tr>
<tr>
<td style="width: 32.3843%;">Light State</td>
<td style="width: 67.6157%;">DIN4.0</td>
</tr>
<tr>
<td style="width: 32.3843%;">Dark State</td>
<td style="width: 67.6157%;">DIN5-8/9-13</td>
</tr>
<tr>
<td style="width: 32.3843%;">Shade Control</td>
<td style="width: 67.6157%;">Internal (digital display control)</td>
</tr>
<tr>
<td style="width: 32.3843%;">Power On/Off</td>
<td style="width: 67.6157%;">Automatic on/off</td>
</tr>
<tr>
<td style="width: 32.3843%;">Sensitivity Control</td>
<td style="width: 67.6157%;">Digital display control</td>
</tr>
<tr>
<td style="width: 32.3843%;">UV/IR Protection</td>
<td style="width: 67.6157%;">Up to DIN 16 at all times</td>
</tr>
<tr>
<td style="width: 32.3843%;">Power Supply</td>
<td style="width: 67.6157%;">Solar cell with 2 replaceable CR2450 lithium batteries</td>
</tr>
<tr>
<td style="width: 32.3843%;">Delay (Dark to Light)</td>
<td style="width: 67.6157%;">0.1-1.0s adjustable by digital display control</td>
</tr>
<tr>
<td style="width: 32.3843%;">Low Amperage TIG Rated</td>
<td style="width: 67.6157%;">&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td style="width: 32.3843%;">Grinding</td>
<td style="width: 67.6157%;">Yes</td>
</tr>
<tr>
<td style="width: 32.3843%;">Low Battery Indicator</td>
<td style="width: 67.6157%;">Digital display</td>
</tr>
<tr>
<td style="width: 32.3843%;">Operating Temperature</td>
<td style="width: 67.6157%;">-10℃ to 55℃</td>
</tr>
<tr>
<td style="width: 32.3843%;">Storing Temperature</td>
<td style="width: 67.6157%;">-20℃ to 70℃</td>
</tr>
<tr>
<td style="width: 32.3843%;">Helmet Material</td>
<td style="width: 67.6157%;">High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM24 ADF845D stands out with its remarkable optical clarity and wide field of view. This welding helmet features an exceptionally large 97x81mm viewing area, facilitating comprehensive observation of the work environment and thus enhancing safety awareness.

<p>The TM24 ADF845D welding helmet stands out with its wide 97x81mm viewing area and superior optical clarity. It enhances safety and efficiency by allowing users to better observe their work environment. This durable and ergonomic helmet is ideal for both professional and amateur welders.</p>
<ul>
<li>The product is certified with the highest optical class of 1/1/1/1 by CE standard, indicating superior light diffusion and homogeneity.</li>
<li>The helmet offers a viewing area 50% wider than traditional filters, aiding welders in better navigating and reducing the likelihood of accidents.</li>
<li>Welders can swiftly switch between welding and grinding modes without the need to remove their welding helmet or gloves.</li>
<li>The adjustable pivot headgear with a built-in locking mechanism ensures maximum comfort and balanced weight distribution.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Specification</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF845D</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>97*81mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>133*<em>114*</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-8/9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal (digital display control)</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>Digital display control</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 2 replaceable CR2450 lithium battery</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable by digital display control</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Digital display</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temperature</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM24 with ADF845D Auto Darkening Welding Helmet

The TM25 welding helmet, equipped with the ADF615S filter, offers advanced clarity of vision and rapid response time, providing superior protection and comfort during welding. This helmet enhances the safety and work efficiency of welders with its durable structure and ergonomic design.

<p>The TM25 ADF615S is an auto-darkening welding helmet characterized by its lightweight design, high-impact durability, dual arc sensors, ultra-fast 1/16,000-second transition to dark mode, and adjustable shading, delay, and sensitivity features.</p>
<ul>
<li>The high-impact resistant structure protects the user against potential dangers, enhancing safety and durability.</li>
<li>Two independently operating internal arc sensors focus on welding arcs regardless of environmental influences, providing more precise and effective usage.</li>
<li>A rapid transition time of 1/16,000 seconds triggers an immediate shift to dark mode when an arc is detected, made possible by highly sensitive sensors.</li>
<li>Shading, delay, and sensitivity settings can be easily adjusted using a dial knob, offering the user flexibility for various welding environments.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Value</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF615S</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>96*40mm</td>
</tr>
<tr>
<td>Arc Sensors</td>
<td>2</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN9-13</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/25000s</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10&deg;C to 55&deg;C</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>Infinite adjustment knob</td>
</tr>
<tr>
<td>Delay (From Dark to Light)</td>
<td>0.1-1.0s</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>

TM-25 ADF615S Auto-Darkening Welding Helmet

950D-G model is an innovative welding helmet offering a wide viewing area and Shade 5 side lenses for enhanced comfort and safety.

<p>The 950D-G welding helmet, with its wide viewing area, enables welders to complete their tasks without obstruction. The Shade 5 side lenses enhance peripheral vision, ensuring awareness of the surroundings and significantly improving safety. Additionally, its ergonomically designed pivot headgear offers unique comfort for extended use in challenging industrial environments.</p>
<ul>
<li>The welding helmet allows welders to save their favorite settings and quickly recall these settings from memory.</li>
<li>By adjusting the shade level to 14/15, it offers an ultra-dark shade that protects eyes against strong welding sparks.</li>
<li>It provides a 107x75 mm field of view, offering a wide and clear perspective of the work environment.</li>
<li>Shade 5 side lenses on both sides maximize the welder's field of view, enhance peripheral vision, and minimize workplace hazards.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Description</th>
</tr>
</thead>
<tbody>
<tr>
<td><strong>ADF Model</strong></td>
<td>950D-G</td>
</tr>
<tr>
<td><strong>Optical Class</strong></td>
<td>1/1/1/1</td>
</tr>
<tr>
<td><strong>Viewing Area</strong></td>
<td>107*75mm</td>
</tr>
<tr>
<td><strong>Cartridge Size</strong></td>
<td>156<em>123</em>33mm</td>
</tr>
<tr>
<td><strong>Arc Sensor</strong></td>
<td>4+2 (automatic)</td>
</tr>
<tr>
<td><strong>Light State</strong></td>
<td>DIN3.0</td>
</tr>
<tr>
<td><strong>Dark State</strong></td>
<td>DIN5-8/9-15</td>
</tr>
<tr>
<td><strong>Shade Control</strong></td>
<td>Internal (digital display control)</td>
</tr>
<tr>
<td><strong>Power On/Off</strong></td>
<td>Automatic on/off</td>
</tr>
<tr>
<td><strong>Sensitivity Control</strong></td>
<td>Digital display control</td>
</tr>
<tr>
<td><strong>UV/IR Protection</strong></td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td><strong>Power Supply</strong></td>
<td>Solar cell with 2 replaceable CR2450 lithium batteries</td>
</tr>
<tr>
<td><strong>Delay (Dark to Light)</strong></td>
<td>0.04-0-1.0s, 11-level digital display control</td>
</tr>
<tr>
<td><strong>Low Amperage TIG Rated</strong></td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td><strong>Grinding</strong></td>
<td>Yes</td>
</tr>
<tr>
<td><strong>Low Battery Indicator</strong></td>
<td>Digital display</td>
</tr>
<tr>
<td><strong>Operating Temp.</strong></td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td><strong>Storing Temp.</strong></td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td><strong>Helmet Material</strong></td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

900 with 950D-G Auto Darkening Welding Helmet

The TM25 welding mask equipped with the ADF600S-G2 filter combines advanced technology and user-friendly features to provide welders with exceptional protection and clarity during welding.

<p>The TM25 and ADF600S-G2 welding helmets are lightweight and easy to use. Made from high-impact resistant materials, they offer longevity and durability. Notable features include an externally controllable grinding mode and compatibility with hard hats. The ADF600S-G2 model boasts advanced optics for clear vision. Both helmets are equipped with two arc sensors, providing adjustable shade and sensitivity controls.</p>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Value</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF600S-G2</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>98*44mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>2</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN9-13</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/16,000 sec</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10&deg;C to 55&deg;C</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>Low - High</td>
</tr>
<tr>
<td>Delay</td>
<td>0.1-1.0s</td>
</tr>
<tr>
<td>Temperature Storage</td>
<td>-20&deg;C to 70&deg;C</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>110<em>90</em>9mm</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.</li>
</ul>

TM-25 with ADF600S-G2 Auto Darkening Welding Helmet

The TM14 ADF725S automatic darkening welding mask provides excellent performance with its industrial design. It significantly reduces eye, head, and neck fatigue during prolonged use. Options for different shade control and viewing area are available.

<p>The TM14 is equipped with two independent arc sensors that can operate autonomously. These sensors focus on the welding arc without being affected by environmental factors and can be used even under direct sunlight. Additionally, they feature high-sensitivity sensors capable of transitioning to dark mode in a rapid 1/25000 second.</p>
<ul>
<li>The TM14 features an industrial design with advanced headgear that significantly reduces eye, head, and neck fatigue.</li>
<li>The helmet has two independently functioning arc sensors that focus on the welding arc without being affected by environmental factors and can be used even under direct sunlight.</li>
<li>It possesses a fast switching feature of 1/25000 seconds, enabling an instant transition to dark mode without delay when an arc is detected by highly sensitive sensors.</li>
<li>The helmet is powered by a solar cell and includes two replaceable AAA Alkaline batteries.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Detail</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF725S</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>98*44mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>110*<em>90*</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>2</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>External</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>By infinitely dial knob</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 2 replaceable AAA Alkaline batteries</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/25000s from light to dark</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable by infinitely dial knob</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;5 amps (DC); &ge;5 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temperature</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM14 with ADF725S Auto Darkening Welding Helmet

The TM15 ADF730S welding helmet offers the highest optical class to provide the best vision experience. Additionally, it features a 95×62 mm wide filter screen and is rated for ≥2 amps (DC/AC) low amperage TIG.

<p>The TM15 ADF730S is a welding helmet designed to provide comfort and safety during welding. This model is equipped with a large filter screen measuring 95&times;62 mm. The helmet is also suitable for low amperage TIG welding operations.</p>
<ul>
<li>Certified by CE standard as 1/1/1/1 highest optical class, meaning it ensures high-quality light diffusion, light homogeneity, and angle dependence.</li>
<li>Equipped with 4 independent arc sensors that focus on the welding arc without any interference from surroundings, suitable even under direct sunlight.</li>
<li>A wide filter screen measuring 95&times;62 mm, rated for &ge;2 amps (DC/AC) low amperage TIG.</li>
<li>Features a solar cell and a replaceable CR2450 lithium battery.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Description</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF730S</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>95*62mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>110<em>90</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-8/9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>External</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>Infinitely adjustable knob</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Always up to DIN 16</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell and 1 replaceable CR2450 lithium battery</td>
</tr>
<tr>
<td>Transition Time</td>
<td>From light to dark 1/25000s</td>
</tr>
<tr>
<td>Delay (from dark to light)</td>
<td>0.1-1.0s, infinitely adjustable knob</td>
</tr>
<tr>
<td>Low Amperage TIG Rating</td>
<td>&ge;2 amps (DC); &ge;2</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10&deg;C to 55&deg;C</td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>-20&deg;C to 70&deg;C</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact-resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>
<p>&nbsp;</p>

TM15 with ADF730S Auto Darkening Welding Helmet

TM15 with ADF710S Auto Darkening Welding Helmet

The TM24 ADF820S model is a welding mask with a high optical class that provides an excellent field of vision during welding. This mask features an ultra-wide 95x85mm viewing area and enhances the user's safety and efficiency during welding thanks to its four independent sensors.

<p>The TM24 ADF820S is wide 95x85mm viewing area offers superior clarity and a broad perspective during welding operations, while its four independent detection sensors ensure a precise and safe welding experience. The ergonomic design and lightweight structure provide comfort even during prolonged use. The TM24 ADF820S stands out as a model that enhances the welder's performance with its durability and high optical quality.</p>
<ul>
<li>
<p>The mask's optical class is certified as 1/1/1/1 by CE standards.</p>
</li>
<li>
<p>It has an ultra-wide viewing area measuring 95x85mm. This provides a 50% wider field of view than traditional filters, offering an unobstructed view of the workpiece and surroundings.</p>
</li>
<li>
<p>It allows for easy switching between welding and grinding modes.</p>
</li>
<li>
<p>It features an adjustable pivot headgear with a built-in locking mechanism. This provides maximum comfort and balanced weight distribution.</p>
</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Specification</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF820S</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>95*85mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>133*<em>114*</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-8/9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>By infinitely dial knob</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 1 replaceable CR2450 lithium battery</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable by infinitely dial knob</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temperature</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM24 with ADF820S Auto Darkening Welding Helmet

TM16 ADF830SG, features a smart digital display and the highest optical class, offering superior clarity and precision in welding.

<p>TM16 with ADF830SG, especially useful in low-light conditions or tasks requiring focus, features a smart and backlit digital display. Users can easily switch between welding, cutting, grinding, and arc spot modes. The helmet, with its four independent arc sensors, prevents arc flashes in complex working environments and adjusts to fit different head shapes with its adjustable headgear.</p>
<ul>
<li>The smart backlit digital display ensures clear and accurate visibility of welding settings even in low-light or dark environments.</li>
<li>The headgear features two adjustable straps to fit different head shapes, making it easy to adjust the viewing angle and distance.</li>
<li>Four independent, built-in sensors help prevent arc flashes in complex operating environments.</li>
<li>Allows for quick switching between welding and grinding modes without having to remove the welding helmet or gloves.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Description</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF830SG</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>97*62mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>133<em>114</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-8/9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal (digital display control)</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>Digital display control</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 2 replaceable CR2450 lithium batteries</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable by digital display control</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Digital display and grind button control</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>N/A (Not Applicable)</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Digital display and red light</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10&deg;C to 55&deg;C</td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>-20&deg;C to 70&deg;C</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High-impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM16 with ADF830SG Auto Darkening Welding Helmet

The TM22 helmet features the ADF150F auto-darkening filter, quick transition time, a high-impact resistant lightweight nylon structure, and is suitable for various welding processes.

<p>TM22 with ADF150F auto-darkening filter meets the needs of welders, offering fast reaction time and a wide viewing area. Its lightweight nylon structure with high impact resistance provides both durability and comfort. The long-lasting battery and compatibility with hard hats ensure a reliable user experience even in tough working conditions.</p>
<ul>
<li>Its strong head inclination effectively blocks up to 30% of the emitted heat, providing extra protection to the user.</li>
<li>The cover can be easily and quickly opened by flipping it upwards, offering ease of use.</li>
<li>Made from high-impact resistant nylon material, it provides a lightweight yet strong structure.</li>
<li>The automatic darkening filter feature transitions from a light state of 3.0 to DIN10/11 in 1/4000 seconds, offering effective protection in varying light conditions.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Information</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF150F</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN10/ DIN11</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-20&deg;C to 70&deg;C</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>95*35mm</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Delay (From Dark to Light)</td>
<td>0.25-0.45s</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>108*<em>50,8*</em>5mm</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE&nbsp;</li>
<li>EAC</li>
<li>UKCA</li>
</ul>

TM22 Replaceable Cover Lens with ADF150F Auto Darkening Welding Helmet

The TM22 with ADF110P welding helmet is made of heat and high-temperature resistant leather, effectively blocks arc light, and features a lightweight, comfortable design suitable for prolonged use in tight spaces, and can be paired with hard hats for additional protection.

<p>The TM22 with ADF110P welding helmet is equipped with a durable battery designed for extended use. It is made of leather, providing protection against high temperatures and heat. It effectively blocks arc light and offers higher wearing comfort due to its soft and lightweight structure. Its shawl design also protects the neck area from splashes.</p>
<ul>
<li>Its strong head inclination effectively blocks up to 30% of the emitted heat, providing extra protection to the user.</li>
<li>The cover can be easily and quickly opened by flipping it upwards, offering ease of use.</li>
<li>Made from high-impact resistant nylon material, it provides a lightweight yet strong structure.</li>
<li>The variable shade auto-darkening filter offers infinite adjustability between shade levels 8-13 and has a fast switching time of 1/10,000 seconds. These features ensure quick and effective adaptation for the user in varying light conditions.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Information</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF110P</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN8-13</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10&deg;C to 55&deg;C</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>92.1*35.1mm</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Delay (From Dark to Light)</td>
<td>0.1-1.0s infinite dial</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>108*<em>50,8*</em>8mm</td>
</tr>
<tr>
<td>Switching Time (From Light to Dark)</td>
<td>1/10000s</td>
</tr>
</tbody>
</table>
<p>&nbsp;</p>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li><strong>CE</strong></li>
<li><strong>EAC</strong></li>
</ul>

TM22 Replaceable Cover Lens With ADF110P Auto Darkening Welding Helmet

The TM15 welding mask is designed to meet the needs of professional welders. The ADF740L model is equipped with advanced optics that feature an extended shade range.

<p>The TM15 welding helmet, paired with the ADF710D model, offers an advanced optical system with an extended shade range, providing clear vision and compatibility in various welding environments. Additionally, its innovative automatic parameter saving feature enables welders to quickly resume work with their previous settings, reducing job interruptions and increasing work efficiency.</p>
<ul>
<li>Parameters are automatically saved after changes, so you can resume work with your previous settings after a restart.</li>
<li>It offers a shade range of 3.0 (grinding), 5-8 (cutting), 9-13 (welding), 14-15 (dark mode).</li>
<li>It features a user-friendly and intuitive control panel. Mode switching, sensitivity, delay, and shade number can be adjusted with just a short press.</li>
<li>Digital display control allows for easy switching between four mode options: GRIND, CUTTING, WELD, and DARK modes.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Description</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF710D</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>97*47mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>110*<em>90*</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>2</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.0</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-8/9-13/14-15</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal (digital display control)</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>Digital display control</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 1 replaceable CR2450 lithium battery</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/25000s from light to dark</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable by LED and button control</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>N/A</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes (digital display)</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temperature</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM15 with ADF710D Auto Darkening Welding Helmet

The TM16 is a multifunctional industrial welding helmet equipped with the ADF815L auto-darkening filter.

<p>TM16 ADF815L provides superior protection against arc flashes in complex work environments with its four independent rear sensors. It features DARK mode, 1/1/1/1 optical class, a wide viewing area, and a digital display controlled shade adjustment feature.</p>
<ul>
<li>Provides reliable protection against arc flashes in complex working environments.</li>
<li>Allows for quick switching between welding and grinding modes, eliminating the need to remove the helmet or gloves.</li>
<li>Adjustable headband for maximum comfort and balanced weight distribution.</li>
<li>Suitable for various welding processes, offering high optical classification and a wide viewing area.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Description</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF815L</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>94*62mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>133*114*9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.0</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-9/10-14</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal (digital display control)</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>By infinitely dial knob</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 2 replaceable CR2450 lithium batteries</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/25000s from light to dark</td>
</tr>
<tr>
<td>Delay (dark to light)</td>
<td>0.1-1.0s adjustable by infinitely dial knob</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temp.</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temp.</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM16 with ADF815L Auto Darkening Welding Helmet

The TM16 ADF820L welding helmet offers an extra-large viewing area with 4+1 independent sensors, ensuring comprehensive observation and enhanced safety in the working environment.

<p>The TM16 ADF820L welding helmet, equipped with 4+1 independent sensors and offering a wide viewing area of 95x80mm, provides comprehensive observation capabilities in the working environment. Its safety-focused design maximizes protection for both the welder and those around, enhancing overall safety.</p>
<ul>
<li>Offers a wide viewing area of 95x80mm and is equipped with 4+1 independent sensors.</li>
<li>Features an external button to switch to grinding mode, enhancing the helmet's functionality.</li>
<li>Compatible with hard hats, providing additional head protection for the user.</li>
<li>Includes intelligent shade adjustment with external grinding control and comfortable headgear, offering a more effective and safer welding experience.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Description</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF820L</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>95*80mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>133<em>114</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4+1 (automatic)</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN2.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-9/9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal, LED and button control</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>Digital display control</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell and 1 replaceable CR2450 lithium battery</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.05/0.1/0.3/0.6/1.0s, 5 levels</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes, LED and button control</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10&deg;C to 55&deg;C</td>
</tr>
<tr>
<td>Temperature Storage</td>
<td>-20&deg;C to 70&deg;C</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM16 with ADF820L Auto Darkening Welding Helmet

TM14 with ADF735S, an industrially designed welding helmet, offers outstanding performance with an extended viewing area equipped with four arc sensors. This helmet is also designed for comfort, featuring a lithium battery to reduce its weight.

<p>The TM14 with ADF735S is a high-performance welding helmet designed for welding operations, offering a wide field of view and four arc sensors. Its lightweight design ensures comfort during prolonged use, while its versatility and durability are enhanced by an externally accessible grinding mode button and high-impact-resistant nylon material.</p>
<ul>
<li>The helmet offers an extended viewing area enhanced with four arc sensors, providing comprehensive visibility during welding operations.</li>
<li>It is equipped with a lithium battery, contributing to its lightweight design, which helps reduce user fatigue during extended use.</li>
<li>The helmet features an external button that allows for an easy switch to grind mode, adding versatility to its functionality. This welding helmet can be paired with hard hats, offering additional head protection, making it suitable for various industrial environments.</li>
<li>Made from high-impact resistance nylon, the helmet ensures durability and safety.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Description</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF735S</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>96*53mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>110*<em>90*</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>External</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>By infinitely dial knob</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 1 replaceable CR2450 lithium batteries</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/25000s from light to dark</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable by infinitely dial knob</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;5 amps (DC); &ge;5 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temp.</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temp.</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

TM14 with ADF735S Auto Darkening Welding Helmet

The 950-D is a welding helmet offering a wide viewing area, suitable for grinding and cutting tasks, equipped with various features. Its side lenses, digital display, and lightweight design make it ideal for prolonged use.

<p>The 950-D is a welding helmet with a wide viewing area and side lenses, offering advanced protection. Suitable for grinding and cutting tasks, it features a digital display and a lightweight design for convenience. Constructed from high-impact resistant nylon, it is durable under various temperature conditions.</p>
<ul>
<li>Offers a 107x55 mm viewing area, providing a wide and clear perspective of the work environment.</li>
<li>Equipped with Shade 5 side lenses on both sides, these lenses expand the welder's field of view, enhancing peripheral vision and minimizing workplace hazards.</li>
<li>Features a smart digital backlit display, ensuring clear and accurate visibility of welding settings even in low-light or dark environments.</li>
<li>Provides superior clarity and visual acuity to welders with a Shade 2.0 in the light state and up to 31% light transmittance.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature Category</th>
<th>Details</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>950-D</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/1</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>107*75mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>156<em>123</em>33mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>4</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.0</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN5-8/9-15</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal (digital display control)</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>Digital display control</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 2 replaceable CR2450 lithium batteries</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.04-1.0s adjustable by digital display control</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;2 amps (DC); &ge;2 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Digital display</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temperature</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<p style="text-align: center;"><strong>Approvals</strong></p>
<ul>
<li>CE</li>
<li>ANSI Z87.1</li>
<li>AS/NZS</li>
<li>EAC</li>
<li>COLTS CSA Z94.3</li>
</ul>
<p>&nbsp;</p>

900 with 950-D Auto Darkening Welding Helmet

The N-SPACE Flip-up Leather Mask with ADF150F is a lightweight and flexible leather welding mask, equipped with an auto-darkening filter feature, making it ideal for prolonged work in tight spaces.

<p>The N-SPACE Flip-up Leather Mask with ADF150F is made of leather that provides protection against high temperatures and heat, and effectively blocks arc light. Additionally, its soft and lightweight structure offers a comfortable wearing experience, and its shawl design helps protect the neck area from splashes.</p>
<ul>
<li>Auto-Darkening filter feature provides an extremely safe working environment even in unexpected situations.</li>
<li>Manufactured from materials resistant to high temperatures up to 150 &deg;C.</li>
<li>Designed for durability in continuous use and challenging environments.</li>
<li>Exhibits superior resistance to impacts and mechanical stresses due to its high strength properties.</li>
<li>Made from non-flammable materials, adding an extra layer of safety in fire-involved processes like welding and casting.</li>
<li>Adjustable headband tightness to fit various head sizes.</li>
<li>Constructed from non-harmful, hypoallergenic materials.</li>
</ul>
<table>
<thead>
<tr>
<th>Feature</th>
<th>Description</th>
</tr>
</thead>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF150F</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>92*35mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>108*<em>50.8*</em>5mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>2</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.0</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN10 / DIN11</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with a built-in battery</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/4000s from light to dark</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.25-0.45s</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;35 amps (DC); &ge;35 amps (AC)</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-5℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temperature</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Mask Material</td>
<td>Split leather</td>
</tr>
</tbody>
</table>
<p style="text-align: center;">Approvals</p>
<ul>
<li>CE</li>
<li>EAC</li>
</ul>

N-SPACE Flip-up Leather Flexible Mask with ADF150F

The TM14 ADF720S welding mask is industrially designed and manufactured for exceptional performance. Its advanced helmet design significantly reduces eye, head, and neck fatigue during prolonged use.

<p>The TM14 ADF720S welding mask is equipped with an advanced helmet design for comfort during prolonged use, reducing eye, head, and neck fatigue. It features an internal grinding mode button that remains at a DIN 3.5 shade level, two independent arc sensors resistant to sunlight, a fast transition to dark mode in 1/25,000 of a second, and a wide viewing area.</p>
<ul>
<li>The internal grinding control allows users to maintain the shade level at DIN 3.5 during grinding, optimizing eye protection.</li>
<li>Independent arc sensors focus on welding sparks without being affected by environmental light sources, providing high precision, especially in direct sunlight.</li>
<li>The fast switching speed, with a transition time of 1/25000 seconds, immediately shifts to dark mode, ensuring maximum eye protection.</li>
<li>The replaceable battery feature, powered by solar cells and two replaceable AAA Alkaline batteries, offers uninterrupted performance and easy maintenance.</li>
<li>The advanced headgear design reduces eye, head, and neck fatigue, providing comfort during long welding operations.</li>
</ul>
<table>
<tbody>
<tr>
<td>ADF Model</td>
<td>ADF720S</td>
</tr>
<tr>
<td>Optical Class</td>
<td>1/1/1/2</td>
</tr>
<tr>
<td>Viewing Area</td>
<td>98*44mm</td>
</tr>
<tr>
<td>Cartridge Size</td>
<td>110*<em>90*</em>9mm</td>
</tr>
<tr>
<td>Arc Sensor</td>
<td>2</td>
</tr>
<tr>
<td>Light State</td>
<td>DIN3.5</td>
</tr>
<tr>
<td>Dark State</td>
<td>DIN9-13</td>
</tr>
<tr>
<td>Shade Control</td>
<td>Internal</td>
</tr>
<tr>
<td>Power On/Off</td>
<td>Automatic on/off</td>
</tr>
<tr>
<td>Sensitivity Control</td>
<td>By infinitely dial knob</td>
</tr>
<tr>
<td>UV/IR Protection</td>
<td>Up to DIN 16 at all times</td>
</tr>
<tr>
<td>Power Supply</td>
<td>Solar cell with 2 replaceable AAA Alkaline batteries</td>
</tr>
<tr>
<td>Switching Time</td>
<td>1/25000s from light to dark</td>
</tr>
<tr>
<td>Delay (Dark to Light)</td>
<td>0.1-1.0s adjustable by infinitely dial knob</td>
</tr>
<tr>
<td>Low Amperage TIG Rated</td>
<td>&ge;5 amps (DC); &ge;5 amps (AC)</td>
</tr>
<tr>
<td>Grinding</td>
<td>Yes</td>
</tr>
<tr>
<td>Battery Capacity Test</td>
<td>Yes</td>
</tr>
<tr>
<td>Low Battery Indicator</td>
<td>Yes</td>
</tr>
<tr>
<td>Operating Temp.</td>
<td>-10℃ to 55℃</td>
</tr>
<tr>
<td>Storing Temp.</td>
<td>-20℃ to 70℃</td>
</tr>
<tr>
<td>Helmet Material</td>
<td>High impact resistant nylon</td>
</tr>
</tbody>
</table>
<div class="w-full text-token-text-primary border-b border-black/10 gizmo:border-0 dark:border-gray-900/50 gizmo:dark:border-0 gizmo:bg-transparent dark:bg-gray-800 gizmo:dark:bg-transparent" data-testid="conversation-turn-6">
<div class="p-4 gizmo:py-2 justify-center text-base md:gap-6 md:py-6 m-auto">
<div class="flex flex-1 gap-4 text-base mx-auto md:gap-6 gizmo:gap-3 gizmo:md:px-5 gizmo:lg:px-1 gizmo:xl:px-5 md:max-w-2xl lg:max-w-[38rem] gizmo:md:max-w-3xl gizmo:lg:max-w-[40rem] gizmo:xl:max-w-[48rem] xl:max-w-3xl } group">
<div class="flex-shrink-0 flex flex-col relative items-end">
<div class="pt-0.5">
<p style="text-align: center;"><strong>Approvals<br /></strong></p>
<ul>
<li class="gizmo-shadow-stroke flex h-6 w-6 items-center justify-center overflow-hidden rounded-full" style="text-align: left;">CE</li>
<li class="gizmo-shadow-stroke flex h-6 w-6 items-center justify-center overflow-hidden rounded-full" style="text-align: left;">ANSI Z87.1</li>
<li class="gizmo-shadow-stroke flex h-6 w-6 items-center justify-center overflow-hidden rounded-full" style="text-align: left;">AS/NZS</li>
<li class="gizmo-shadow-stroke flex h-6 w-6 items-center justify-center overflow-hidden rounded-full" style="text-align: left;">EAC</li>
<li>COLTS CSA Z94.3<strong><br /></strong></li>
</ul>
</div>
</div>
</div>
</div>
</div>

SELECT A LANGUAGE

TM15 with ADF710S Auto Darkening Welding Helmet

More Products

More Information

Feature	Value
ADF Model	ADF710S
Optical Class	1/1/1/2
Viewing Area	97*47mm
Cartridge Size	110909mm
Arc Sensor	2
Light State	DIN2.5
Dark State	DIN8-12
Shade Control	Internal
Power On/Off	Automatic on/off
Sensitivity Control	By infinitely dial knob
UV/IR Protection	Up to DIN 16 at all times
Power Supply	Solar cell with 1 replaceable CR2450 lithium battery
Switching Time	1/25000s from light to dark
Delay (Dark to Light)	0.1-1.0s adjustable
Low Amperage TIG Rated	≥2 amps
Grinding	Yes
Battery Capacity Test	N/A
Low Battery Indicator	Yes
Operating Temp.	-10℃ to 55℃
Storing Temp.	-20℃ to 70℃
Helmet Material	High impact resistant nylon